- Documents
- Parts
- Videos
- News
VIVID E9 113 GE HEALTHCARE CONFORMANCE STATEMENT DIRECTION DOC1264026 REV 1 CONFORMANCE STATEMENT OVERVIEW Vivid E9 is an Ultrasound scanner acting as an acquisition modality in a DICOM network. Table 0.1 provides an overview of the network services supported by Vivid E9. Table 0.1 – NETWORK SERVICES.
DESCRIPTION
The GE Vivid E95 Console Ultrasound Machine is an ultrasound scanner in the GE Vivid line available through National Ultrasound.Manufactured by a leading medical supply brand, the GE Vivid E95 comes equipped with the latest technology in diagnostic imaging, storage capacity, and high-resolution display. The Vivid E95 is ideal for Cardiology, Vascular, and Internal Medicine applications. The Vivid ultrasounds are compatible with GE transducers.
FORUMSView All (3)
Ask a New Question9Repliesa year ago | a year agoDicom Configuration I have VIVID E95 new unit was installed before 9 months ago the unit working good till last month, the network was down 3 hour but fixed (No update No change just rest system) after day from that the unit not transfer the imageThe configuration not changed when i checked i found the unit not pinging ,the IP address and A title same (all configuration same not changed) before that day the unit working properly.I contact with GE service Engineer after investigation he did found any problem in machine told me IT Issues, we contact with our IT Department he check the network every thing ok no problem even other machines from GE Vivid 7, vivid i also Phillips machine IE33, all working without any problem then told us the problem in your machineThe Ge service engineer reload software to confirm the problem not in his machine but same result (the PACS verified but not pinging) I try with IP address from machine working but result, even i transfer the unit different floor but same result . After that we received 3 new machine Vivid E95 new unit when make configuration also not pinging all. then Ge services engineer told me the problem in your network till now i don't know how to solve this problem Please if anyone have suggestions Please support....Reply |
| -BMET-KY 2 years ago | 2 years agoM5Sc-d issues Hello, I have 5 systems that all have had issues with CW noise when cable is moved at Strain relief. Requiring replacement of the transducer 2 systems have had them replaced twice in less than a year and a half. GE tech support says they haven't had widespread issues. I am reaching out to see if anyone else has been having similar issues. ThanksReply |
2Replies2 years ago | 2 years agoTouch screen calibration The service doc I have (service manual GC091052) does not show any calibration instructions for the touch screen. If anyone can provide information about that, please let me know. Thanks.Reply |
SPECIFICATIONS
| Cart Based | 1 |
| Color-flow Mapping | 1 |
- Parts
- News
DESCRIPTION
The Vivid E9 is GE Healthcare0019s first cardiovascular ultrasound system built specifically for 4D imaging.Whether in 4D TTE or 4D TEE, capture the entire heart in a single beat. Image a valve, or the entire ventricle. And help break down the barriers to routine day-to-day 4D imaging, from acquisition, through navigation and quantification, to archiving. The Vivid E9 is available in both 2D and 4D configurations.
FORUMSView All (15)
Ask a New Question3Replies2 months ago | 2 months agoDevice goes ON/OFF by itself Hello, I've problem with Vivid E9. When I turn mains switch behind on, power button goes amber than green, and device goes on, but after few seconds shuts off (all vents spin, cpu vent too). Even I got GE logo on monitor. Device stays on sometimes 10 seconds sometimes one second and than switch it off. When I look at LED on BEP 6 power supply board and device goes fully on all LEDs are lit but with sudden OFF only 5VSB stays on. Then I switch off back switch and try to power on again, but then only LEDs 5VSB +28V and +48V lits for few seconds (5VSB stays again). I don't touch anything, but device goes on again than off, than on...off.... 5V in standby is about 4.7V. When I get 48V LED measured voltage is OK. That means that main power supply is OK? Is BEP 6 PS board faulty? https://i.postimg.cc/pd3VvqKf/20191001-153140.jpghttps://i.postimg.cc/W4dpxQqp/20191001-211735.jpg LEDs on second photo are not dimmed, I took photo during LED turning off Regards! Reply |
| -Alexb_ultrasound 3 years ago | 3 years agoBIOS Load CD for BEP6 Hello, I am looking for the BIOS load CD for the BEP6. Can't find the PN or the CD anywhere...Can anyone help with the part number or if they have a copy?Reply |
4Replies3 years ago | 3 years agoGE Vivid E9 BIOS Password Does anyone know the BIOS password for the GE Vivid E9s?Reply |
DOCUMENTS / MANUALSView All
Ge Healthcare Vivid E9
VIDEOS
GE Vivid E9 - DICOM Setup...
Ge Vivid E9 User Manual
GE Vivid E9 - DICOM Setup...
GE Vivid E9 - Creating a Backu...GE Vivid E9 - Creating a Backup...
GE Vivid E9 DRX5 Board Removal...For more information visit www.mysummitimaging.com...
GE Vivid E9 Acquisition Fan Tr...For more information visit www.mysummitimaging.com...
FEATURES
- Industry’s first configurable TEE transducer
- New tilt and rotate function
- Live “2-Click Crop” tool
- Workflow enhancements can also be achieved during mitral valve acquisition with a dedicated MV button and during quantification with a new plug-in tool that has the potential to decrease assessment time.
SPECIFICATIONS
Ge Vivid I User Manual
| Cart Based | 1 |
| Clinical Applications | Cardiology |
| Color-flow Mapping | 1 |
| Image Display | 17 in The 17-inch all-digital high-definition LCD display tilts and swivels to a comfortable viewing angle. |
| Imaging Capabilities | 4D |
| Portable | 1 |