Ge Security 60 983 Atp1000 User Manual

Advertising

ATP1000 Touchpad/Display Installation Instructions Product summary The ATP1000 lets you control all programming and operation of compatible security systems (see the “Specifications” section). The large 2-line, 16-character display provides easy to read. User’s Manual.

Connecting the touchpad for system

programming only

For installations that don’t include an alphanumeric touchpad

as a permanent part of the system, you can connect one for

system programming to the Programming Touchpad Header

on the panel.

To do this you must first connect a Programming Touchpad

Cable (60-791) to the touchpad wires (see Programming

Touchpad Cable Installation Instructions—466-1604, included

with the cable). Then, use the appropriate procedure for

connecting the touchpad.

To connect a programming touchpad to a Concord

Express, Concord, or Concord Ultra panel with software

version 2.0 or later:

1. With the panel powered up, connect the cable to the

Programming Touchpad Header (see

).

Caution:

When using the ATP1000 as a programmable

touchpad, be careful not to touch the circuit board exposed on

the pack.

Figure 4. Connecting a Programming Touchpad—Concord
Express Shown, Concord Similar


Programming Touchpad Header Pins

2. Activate the touchpad by pressing 8 + CODE + 0 + 2.

3. Enter program mode by pressing 8 + installer/dealer

CODE + 0 + 0 and program the panel using the panel

Installation Instructions.

4. When programming is completed, simply disconnect the

programming touchpad.

To connect a programming touchpad to a Concord panel

with software versions 1.0–1.6:

1. Disconnect AC and backup battery power.

2. Connect the cable plug onto the panel Programming

Touchpad Header pins (see

).

3. Reconnect the AC and backup battery power. The

touchpad briefly displays ***********, SCANNING BUS

DEVICES, then shows a time and date display.

Note: If the touchpad does not respond as described in

step 3, there may be a bus conflict. To correct this, change

the touchpad unit number as described in the section

“Changing the Touchpad Unit Number.”

Removing the programming touchpad from Concord

Ge Security Interlogix 60-983 Atp1000 Manual

panels with software versions 1.0–1.6:

To prevent a trouble condition, you must delete the

programming touchpad unit number from Concord panel

memory before disconnecting it.

1. After programming is completed, return to the

ACCESSORY MODULES menu, then press É. The

display should read BUS DEVICES.

2. Press É. The display shows the lowest unit number and its

device name.

3. Press A or B until the display shows the programming

Interlogix

touchpad unit number.

Ge Security 60-983 Atp1000 Alphanumeric Touchpad Manual

4. Press D to delete the device and its unit number from

Ge Security 60-983 Atp1000 Alphanumeric Touchpad User Manual

panel memory. The display shows:

UNIT - TYPE

14-NONE

5. Exit program mode and disconnect the programming cable

from the panel header.

Testing

Note: Contact the central monitoring station before

Ge Security 60 983 Atp1000 User Manual

Ge Security 60-983 Atp1000 Manual

activating alarms, to avoid dispatching local police and fire

departments.

Test the touchpad by arming/disarming the system, activating

the touchpad panics, bypassing sensors, and by turning chime

and lights on/off to verify correct operation. Refer to the panel

User’s Manual for complete system operating instructions.

Adjusting display brightness and contrast

The touchpad display can be adjusted for easier viewing to

help compensate for lighting conditions in the touchpad

location.

The brightness adjustment lightens or darkens the background.

Ge Security 60-983 Atp1000 User Manual

The contrast adjustment lightens or darkens the text.

ATP1000 Touchpad/Display Installation Instructions

3

Advertising
Popular Brands
Ge security interlogix 60-983 atp1000 manual
Popular manuals