BIXOLON SRP-350plusII. User guide. Download PDF for free and without registration! Manuals Directory ManualsDir.com - online owner manuals library. BIXOLON manuals. Download BIXOLON SRP-350plusII User Manual – Download. BIXOLON SRP-350plusII User Manual. Please be sure to read the instruction in this manual carefully before using your new SRP-350/352plus. ※ NOTE The socket-outlet shall be near the equipment and it shall be easy accessible. ※ All specifications are subjected to change without notice.
Rev. 1.05
- 2 -
SRP-350/352plusIIA&C
■ Safety Precautions
In using the present appliance, please keep the following safety regulations in order to
prevent any hazard or material damage.
WARNING
Violating following instructions can cause serious injury or death.
Do not bend the cable by force or leave it under any
heavy object.
• A damaged cable can cause a fire.
Do not plug in or unplug with your hands wet.
• You can be electrocuted.
Keep the plastic bag out of children’s reach.
Bixolon Srp-350 Plus Driver Download For Windows 10
• If not, a child may put the bag on his head.
Do not pull the cable to unplug.
• This can damage the cable, which is the origin of a fire or a
breakdown of the printer.
You must use only the supplied adapter.
• It is dangerous to use other adapters.
Do not plug several products in one multi-outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before usage.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multi-outlets.
PROHIBITED
PROHIBITED
PROHIBITED
PROHIBITED
PROHIBITED
ONLY SUPPLIED ADAPTER
PROHIBITED
Bixolon Srp-350 Plus Driver Download
Rev. 1.05
- 20 -
SRP-350/352plusIIA&C
Bixolon Srp 350 Plus Driver Download
1-11 Connecting the computer
You need an appropriate interface cable.
1-11-
1 Plug the cable connector securely into the printer’s interface connector.
1-11-2 Tighten the screws on both sides of the cable connector.
1-11-3 Attach the other end of the cable to the computer.
1-12 Connecting the Power Supply
※ CAUTIONS
When connecting or disconnecting the power supply from the printer, make sure that the
power supply is not plugged into an electrical outlet. Otherwise you may damage the
power supply or the printer.
If the power supply’s rated voltage and your outlet’s voltage do not match, contact your
dealer for assistance. Do not plug in the power cord. Otherwise, you may damage the
power supply or the printer.
1-12-
1 Make sure that the printer’s power switch is turned off, and the power supply’s
power cord is unplugged from the electrical outlet.
1-12-2 Check the label on the power supply to make sure that the voltage required by the
power supply matches that of your electrical outlet.
1-12-
3 Plug in the power supply’s cable as shown below. Notice that the flat side of the
plug faces down.
※ NOTE
To remove the DC cable connector, make sure that the power supply’s power cord is
unplugged; then grasp the connector at the arrow and pull it straight out.