- Allied Telesis AT-8000S Switch. Installation Guide. This guide contains the hardware installation instructions for the AT-8000S/16, AT-8000S/24, AT-8000S/24POE, AT-8000S/48 and AT-8000S/48POE Fast Ethernet Switches. How This Guide is Organized. This manual contains the following chapters.
- The 8000S Series of Fast Ethernet managed switches provide exceptional performance and flexibility at an affordable price. Learn more now!
Feb 02, 2015: Allied-Telesis Allied-Telesis-At-8000Gs-24Poe-Users-Manual-414389 allied-telesis-at-8000gs-24poe-users-manual-414389 allied-telesis pdf Allied Telesis At 8000Gs 24Poe Users Manual Datasheet AT-8000GS24POE to the manual 38360a3e-4022-7114-210a-599c9f7bdc28.
Download 48 pages, 2.23 Mb Success! {{ $ctrl.successMessage }}
0'>Errors!
>
Allied Telesis AT-8000SSwitch
Chapter 4.Initial ConfigurationConfiguration Overview
Before assigning a static IP address to the device, obtain the following information from the network administrator:
•A specific IP address allocated by the network administrator for the switch to be configured
There are two types of configuration: Initial configuration consists of configuration functions with basic security
considerations, whereas advanced configuration includes dynamic IP configuration and more advanced security
After making any configuration changes, the new configuration must be saved before rebooting. To save the
configuration, enter the following CLI command: The following prompt is displayed:
Configuration
The initial configuration, which starts after the device has booted successfully, includes static IP address and
subnet mask configuration, and setting user name and privilege level to allow remote management. If the device is
to be managed from an SNMP-based management station, SNMP community strings must also be configured.
•Static IP Address and Subnet Mask
Static IP Address and Subnet Mask
Allied Telesis At-8000s Series Manual
IP interfaces can be configured on each port of the device. After entering the configuration command, it is
recommended to check if a port was configured with the IP address by entering the “show ip interface” command.
The commands to configure the device are port specific.
To manage the switch from a remote network, a default gateway must be configured, which is an IP address to
where packets are sent when the destination is within another network. The configured gateway address must
belong to the same subnet as the IP interface of the device.
To configure the default gateway, enter the required commands at the system prompt as shown in the following
configuration example where 101.101.101.101 is the specific management station, and 100.1.1.254 is the default
Console#
Allied Telesis At-8000gs Manual
console#
Allied Telesis Switch
console(config)# interface vlan 1
console(config-if)# ip address 100.1.1.1 255.255.0.0
console(config)# ip default-gateway 100.1.1.254
When we buy new device such as Allied Telesis AT-8000S we often through away most of the documentation but the warranty. Very often issues with Allied Telesis AT-8000S begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Switch Allied Telesis AT-8000S is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Switch on our side using links below.
Allied Telesis Support
Also you can find more Allied Telesis manuals or manuals for other Computer Equipment.